Polen Implement, Ohio
Open today at 8:00 am

Dealer Transfer Request

Fields with asterisks* are required.

Brillion FPSB-6

Double tap to zoom



All in One Solution for Wildlife Food Plots

  • 6' Model Available
  • Three-Point Hitch - Cat. I, II Free Link
  • Three-Point Hitch - Cat. I, II Quick Coupler Hitch
  • Floating Link Allows Seeder to Pivot and Follow the Contour of the Land
  • 18" Notched Disc Blades, Spaced at 7.5", Can be Adjusted to 10 or 15 Degrees Depending on Amount of Tillage Needed
  • Two Rows of Mini S-Tine Cultivator Teeth
  • Teeth are Spaced at 15" on Each Bar for a Nominal Spacing of 7.5"
  • S-Tines are Fully Adjustable and Can be Removed if Only Disc Tillage is Required
  • Double Seed Box Capacity
  • Micro-Metered Box Will Plant Small Granular-Type Seeds at Precise Rates
  • Seed Box Equipped with Brush Agitator Will Plant Larger Seeds and Seed Mixtures Containing a Variety of Seeds
  • User Friendly Seed Rate Adjustments
  • Seed Box Disconnect Klik Pin Disconnects the Seed Drive for Seed Rate Calibration and Prevents Wear and Tear on the Seed Box Drives in Tillage-Only Mode
  • Positive Ground Driven Seed Metering System
  • Pulverizer Roller Packs Seeds Into the Soil for Maximum Seed to Soil Contact
  • 1.5" Self-Aligning, Greaseable Bearings Add to Ruggedness and Reliability of the Seeder
  • Coil Tine Harrow Available for Additional Leveling
  • Cargo/Rock Box Available
  • Powder Coat Paint


 Model FPSB-6
Approximate Weight 1,389 lbs. (625 kg)
Working Width 6 ft. 0 in. (1.8 m)
Overall Width 6 ft. 10 in. (2.05 m)
Overall Transport Height Dependent Upon Tractor
Overall Height (Working) 3 ft. 5 in. (1.03 m)
Overall Length 5 ft. 8 in. (1.7 m)
Disc Assembly  
Blade Spacing 7.5 in. (191 mm)
Blade Size (Main) 18 in. (457 mm) x 9 ga.
Blade Size (End) 16 in. (406 mm) x 11 ga.
Arbor Bolt 1.125 in. (28.6 mm) Square
Gang Bearings 1.125 in. (28.6 mm) Greaseable
Angle of Operation 10 or 15 Degrees
Harrow Assembly  
Tooth Bars 2
Type of Teeth 10" Mini S-Tines with Reversible Points
Tooth Spacing Nominal 7.5 in. (191 mm)
Tooth Depth of Operation 0 to 3 in. (76.2 mm) in 1 in. (25.4 mm) Increments
Under Bar Clearance 11.5 in. (292 mm)
Seeder Assembly  
Seed Box Type All Steel Construction with Cover
Seed Box Capacity 2.625 bu. Each Box
Seed Meters "Micro-Meter" and Brush Agitator
Seed Meter Drive Positive Ground Driven with Disconnect
Seed Meter / Opening Spacing 6 in. (152 mm) / 4 in. (102 mm)
Seed Delivery Broadcast with Wind Deflector Tray
Pulverizer Assembly  
Working Width of Pulverizer 6 ft. 0 in. (1.8 m)
Pulverizer Wheels 9.5 in. (241 mm) Gray Cast Iron
Number of Wheels 31
Pulverizer Scraper Standard
Pulverizer Axle Bearings 1.5 in. (38.1 mm) Greaseable
Axle Size 1.75 in. (44.5 mm)
Floating Hitch Cat. I-II Quick Hitch Compatible
Micro-Meter Seed Box Kit Standard
Brush Agitator Seed Box Kit Standard
Coil Tine Drag Optional
Cargo / Rock Box Kit Optional
Posi-Drive Pulverizer Roller Optional (In Lieu of Standard Pulverizer Assembly)
Powder Coat Paint, Red Standard
Horsepower Requirements 35 HP (26.88 kW) and up
Recommended Operating Speed 3 to 5 MPH (5 to 8.3 km/h)