Dealer Transfer Request
Fields with asterisks* are required.
H&S S3231 310-Bushel
S3231 310-Bushel
Heavy-Duty
Overview:
S3231 164.58 Cu. Ft. Struck Per ASAE S324.2 Heavy-Duty
Heavy 5" Channel Iron Frame Solid Virgin Grade Poly Floor T-Rod Main Apron Hydraulic Endgate
Features
- The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners.
- Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5″ U-channel side members. Compares with any on the market.
- The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel.
- Sides, front panel and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up.
- Solid virgin grade poly floor allows for considerably less torque to move a heavy load.
- The two-speed apron drive is standard equipment.
- The 29″ diameter beater has two styles of replaceable beater paddles. Half of the 14 beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater-side wiper blades are also standard equipment.
- The hydraulic endgate features a single cylinder with the hydraulic lines running through a 3″ x 3″ tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
- Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service.
- Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt.
- The beater drive gear box is 1:1.5 bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut-off.
- The apron drive is a 50:1 bronze worm gear with shear bolt protection.
- PTO Apron Low Speed/540 RPMs: 4′ 8.5″ per minute.
- PTO Apron High Speed/540 RPMs: 8′ 8.5″ per minute
- A front splash guard is standard equipment.
- Greaseable bearings
Specifications
| MODEL | S3231 |
| Capacity | |
| Capacity - Old Rating | 310 bu |
| Capacity Cu. Ft. Struck Level Per ASAE S324.2 | 164.58 |
| Capacity Cu. Ft. Heaped Per ASAE S324.2 | 284.39 |
| Dimensions | |
| Top of Flare Width | 68″ (173 cm) |
| Inside Width | 60″ (152 cm) |
| Inside Length | 14' 10" (4.52 m) |
| Inside Depth | 28 ⅜″ (72 cm) |
| Overall Width w/Standard Tires | 98″ (249 cm) |
| Overall Length | 21′ 11 ½″ (6.7 m) |
| Overall Loading Height-Top Of Side | 51 ½″ (131 cm) |
| Overall Height w/Hyd. Endgate | 55″ (139.7 cm) |
| Construction | |
| Diameter Of Beater | 29″ (74 cm) |
| Main Apron Chain | T-Rod |
| Spindle Size | 2 ¼″ (6 cm) |
| Standard Tire Size | 295 × 22.5 Recap |
| Weight w/Tires | |
| Weight w/Tires | 4,190 lbs. (1,901 kg) |
| Standard | |
| Rear Hydraulic Endgate | Standard |
| PTO Speed | 540 - Standard | 1000 - Optional |
| Jack | Standard |
| Drive | 2-Speed |
| Front Splash Panel | Standard |
| Hyd. Cyl On Hyd. Endgate | 1 - Standard | 2 - Optional |
| Options | |
| Upper Beater | Optional |
COME AND SEE US
- 42255 Oberlin Elyria Road
- Elyria, OH 44035
- Get Directions
- 866-542-5625 | 440-322-7064
Or 440-322-8821 - Fax: 440-281-8768
- M-F: 8:00 am - 5:00 pm
- SAT: 8:00 am - 12:00 pm
© Copyright by Polen Implement, Ohio 2025. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission.