H&S HPV4242 425-Bushel

New Equipment / All Brands / H&S / Manure Spreaders / Hydraulic Push / HPV4242 425-Bushel

Vertical beater models feature reverse flighting on the top 21″ of the beater flighting. This patented feature allows for an even spread pattern of material.
All hydraulic push models use solid virgin grade poly with UV inhibitor for the floor and sides, allowing less friction.
The hydraulic endgate has 2 cylinders with ⅜″ hose and pipe for faster operation in cold weather.
Heavy-duty rectangular tubing is used for the pole to ensure strength and long life.
Structural channel floor supports are spaced 9 ½″ apart are used for maximum floor strength.
Constant velocity PTO
The bottom drive monobloc gearbox features a rear torque limiting PTO with an overrunning clutch that provides protection to the driveline.
The hydraulic push-off system on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
Beater blades are replaceable.
Beater assembly is removable for stockpiling manure.
Removal of the beater assembly is done by simply removing the mounting bolts and disconnecting the PTO gearbox driveshaft.
Choice of bullnose or clevis hitch
Poly bump rails
LED highway lighting

MODEL	HPV4242
Capacity
Capacity - Old Rating	425 bu
Capacity - Cu. Ft Struck Level Per ASAE S324.2	246.53
Capacity Cu. Ft. Heaped Per ASAE S324.2	374.41
Height
Side Loading Height	61 ¼″ (61.3 cm)
2nd Beater Height	-
Vertical Beater Height	104 ½″ (265 cm)
Height - Top of Hyd. Endgate	65″ (165 cm)
Height at Top of Pusher	-
Height - Top of Screen	98″ (249 cm)
Dimensions
Inside Width	72″ (183 cm)
Inside Length	15′ (4.6 m)
Inside Depth	34″ (86 cm)
Overall Width w/Tires	10′ 2″ (310 cm)
Overall Length	29′ 1″ (8.9 m)
Construction
Standard Number of Beaters	2
Horizontal Beater Diameter/Lower	-
Horizontal Beater Diameter/Upper	-
Vertical Beater Diameter	34″ (86 cm)
Replaceable Beater Paddles	Yes
Removeable Beater Assembly	Yes
Hub	8 Bolt
Hitch Choices	Clevis or Bullnose
Tire Choices	425 x 22.5, 19L x 16.1 10 Ply, or 550/45 x 22.5
Hydraulic Endgate	Standard
Poly Side Rails	Standard
PTO Choices	1 ⅜" or 1 ¾" 1000 RPM PTO w/Overrunning Clutch
Hydraulic
Hydraulic Push Cylinder Diameter	3 ½″
Weight w/Tires
Weight w/Tires	8,800 lbs.
Standard
Rear Hydraulic Endgate	Standard

HPV4242 425-Bushel