John Deere MT5 Minimum-Till Ripper

New Equipment / John Deere / Agriculture / Tillage Equipment / MT5 Minimum-Till Ripper

MT5

Minimum-Till Ripper

5 standards
Two stabilizer wheels
Integral
Extended wear standards deliver twice the life expectancy*

Features
Specs

Features

Manage compaction faster

MT11 Drawn paired with 9RX 710 Tractor

MT Series Minimum Till Rippers are built to run at 4 – 7 miles per hour behind today’s high horsepower tractors.

Rip 25 more acres per day with the MT11 compared to the previous 9 standard model. MT Series Rippers break-up deep compaction at depths up to 16 in. while minimizing topsoil disturbance.

Extended wear components lead to higher productivity

MT Standards

Extended wear standards deliver double the life expectancy compared to previous 2100 ripper models. The MT series delivers a highly productive and easy to set minimal maintenance solution to breaking up soil compaction. Spend less time changing components and more time working your ground.

Key Specs

Working width	3.8 m 12.5 ft
Transport width	4.1 m 13.4 ft
Operating depth	Maximum 40.6 cm 16 in.
Miles per hour	6.4-11.2 km/h 4-7 mph
Horsepower per standard	29.8-44.7 kW 40-60 hp
Spacing between standards	76.2 cm 30 in.

Tool configuration

Type	In-line ripper

Working width

Transport width

Operating depth

Maximum	40.6 cm 16 in.

Frame

Size	102x152x0.9.5 mm 4x6x0.375 in.
Maximum underframe clearance	89 cm 35 in.

Operating speed

Miles per hour	6.4-11.2 km/h 4-7 mph

Horsepower required

Horsepower per standard	29.8-44.7 kW 40-60 hp

Depth control

Option 1	3-point hitch for integral

Hydraulic requirements

Hitch

Options	Integral
Three-point hitch requirements	Category 3/4N (with Quik-Coupler)

Standard options

Spacing between standards	76.2 cm 30 in.
Option 1	Trip force Shear-bol: 3,265 kg 7,200 lb Standard type Straight with wear shin: 19 or 31.75 mm 0.75 or 1.25 in. Shear-bolt
Option 2	Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip

Ground-engaging components

Options	Standard: 19 mm (0.75 in.) min-till point: 178 mm (7 in.) low-disturbance: 254 mm (10 in.) ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.) Regular: 57 mm (2.25 in.) Capped: 57 mm (2.25 in.) Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)

Coulters

Type	Spring cushion coulters
Pounds of force	Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in.
Blades	Straight or rippled: 559x4.5 mm 22x0.1777 in.

Closing wheel attachment

Down force	113.4 kg 250 lb
Size	10.2x40.6 cm 4x16 in.
Spacing	19.05 to 35.6 cm 7.5 to 14 in.
Angle adjustments	1 to 15 degree (angle)

Stabilizer/gauge wheels

Type	Two Stabilizer wheels
Wheels	52.1x20.3 cm 20.5x8 in.
Tires	10 PR

Dealer Transfer Request