Woods BB84.50

Quick-Hitch Ready from the factory. No additional hardware is needed to use your quick hitch.
Adjustable Driveline Holder holds the driveline as you prepare to connect or disconnect the cutter.
Tapered Front gives you more room between the tractor tire and cutter when connecting and disconnecting to the tractor.
Woods Exclusive Z-shaped, high-strength steel bumper is twice as thick as competitive models for backing over tough brush.
Large Blade Access Window for quick and easy blade maintenance from the top of the deck.
Deep Cutting Deck works together with high-lift blades and a unique rear baffling design for better cut quality.
Skid Shoes protect the deck and are easy to change. Adjust the height on heavy-duty models.
A Heavy-Duty Crossbar and ¼” steel stump jumper to protect the undercarriage in extreme conditions.
A Full Frame Design with full-length, 3 x 3″ tubes and channels for greater strength and durability.
Stress Points Tied To The 3 X 3″ Tubes (Not The Deck Plate) for added stability.
Rear Baffle, Standard On All Models, concentrates the airflow and ensures cut material is distributed evenly.
Large 1/2-Inch By 4-Inch Blades And Extra Deep Deck precisely cut large amounts of material.

Product Tier	Professional
Tractor PTO Speed (rpm)	540
Hitch	CAT 2 / CAT 3 clevis
Adjustable Cutting Height (in)	2 to 12
Cutting Capacity Diameter (in)	3
Cutting Width (in)	84
Blade Tip Speed (fpm)	16,000
Blade Size (in)	.50 x 4
Blade Carrier	Diamond stump jumper
Deck Thickness (in)	.135 (10 ga)
Side Frame Depth / Thickness (in)	12.7 / 0.25
Frame and Deck Support (in)	3 x 3 tube
Output Shaft Diameter (in)	2
Weight w/ Chain Shielding (lbs)	1,336
Transport Width (in)	91.3
Overall Length (in)	124
Deck Construction	Smooth top, sloped
Gearbox HP	150
Quick-hitch Compatible	Yes
Driveline Protection	Slip-clutch
Skid Shoes	Full-length, replaceable
Rear Bumper	Z-channel
Options	Rubber belting/steel band or chain shielding; check chains, dual tailwheel: round stump jumper

BB84.50